Skip to content
TOPOLUMA

Free DEM and elevation data: where to download it, and which one to use

Copernicus GLO-30, FABDEM, AW3D30, NASADEM, USGS 3DEP and national lidar compared: resolution, coverage, licence, and bare ground or treetops.

Updated · 9 min read

Every contour, terrain mesh and slope map starts from a digital elevation model (DEM): a grid of heights. Several good ones are free, but they differ in resolution, coverage, licence, and in what they actually measure. This guide compares the main free datasets and helps you pick one for a site. Facts were checked against each provider's own documentation in November 2026.

Surface or terrain: the difference that matters most

  • DEM is the general term for any grid of elevations.
  • A DSM (digital surface model) measures the top of whatever is there: roofs, tree canopies, bridges. Most global satellite models are surface models.
  • A DTM (digital terrain model) is the bare ground, with buildings and vegetation removed. National lidar surveys usually publish one.

In open land the two are close. In a forest a DSM can put the "ground" at canopy height, many metres up, and in a city every block becomes a bump. For site design that means contours that wobble through a wood or a slope that is really a row of houses. If the site is wooded or built up, prefer a DTM or read the DSM with that in mind.

The main free datasets

DatasetTypeResolutionCoverageLicence and access
Copernicus DEM GLO-30DSM1 arc-second (about 30 m)GlobalFree and open licence; free registration, also on AWS Open Data
Copernicus DEM GLO-90DSM3 arc-seconds (about 90 m)GlobalFree and open licence
FABDEMDTM (forests and buildings removed)1 arc-second (about 30 m)60° S to 80° NCC BY-NC-SA 4.0: non-commercial; commercial licence from Fathom
ALOS World 3D (AW3D30)DSM1 arc-second (about 30 m)GlobalFree for commercial and non-commercial use under JAXA's terms; registration
NASADEM (reprocessed SRTM)Surface (radar)1 arc-second (about 30 m)60° N to 56° SUS Government work; NASA Earthdata account
USGS 3DEPDTM (bare earth)1 m from lidar where available; 1/3 arc-second (about 10 m) seamlessUnited StatesFree, no use restrictions
National lidar modelsUsually DTM, often also DSMAbout 0.5 m to 2 mCountries that publish openlyVaries: open government licences, CC BY, and some non-commercial

Copernicus DEM

The Copernicus DEM is derived from the TanDEM-X radar mission and is the usual first choice for a global 30 m model. It is a surface model, edited to flatten water bodies and keep rivers flowing downhill. A 10 m version (EEA-10) covers Europe but is not released to the general public. A small number of GLO-30 tiles are not public; some services, such as Sentinel Hub, fill them with GLO-90. Heights are relative to the EGM2008 geoid.

FABDEM

FABDEM, from the University of Bristol and Fathom, is Copernicus GLO-30 with tree and building heights removed by machine learning. It is the closest thing to a global bare-earth model at 30 m, and was designed with flood modelling in mind. The catch is the licence: CC BY-NC-SA 4.0 does not allow commercial use without a separate licence, which rules it out for much paid design work.

ALOS World 3D (AW3D30)

AW3D30 is JAXA's free 30 m surface model, resampled from a commercial 5 m model built from optical stereo images taken by the ALOS satellite between 2006 and 2011. It needs a free account, and its optical source images could not see through clouds, snow or ice, so check its quality in such places. It is a good second opinion where Copernicus looks wrong.

NASADEM and SRTM

SRTM, flown on the Space Shuttle in February 2000, was the standard free DEM for two decades. NASADEM reprocesses the same radar data with better void filling and accuracy. It covers land between 60° N and 56° S, about 80% of the land surface. For most places Copernicus GLO-30 is newer and more accurate, but NASADEM's public-domain status keeps it useful.

USGS 3DEP (United States)

In the United States, the 3D Elevation Program publishes bare-earth DEMs from lidar at 1 m where it has been flown, a seamless 1/3 arc-second (about 10 m) model for the whole country, and the lidar point clouds themselves, all free and without use restrictions through The National Map. For a US site it beats every global model.

National lidar elsewhere

A growing number of countries publish lidar terrain models openly, often at 0.5 m to 1 m: Switzerland's swissALTI3D, England's Environment Agency data, and many other national and regional surveys, so far mostly in Europe and North America. They are the best data you can get without commissioning a survey. Check each licence: many require attribution, such as the UK Open Government Licence, and a few are non-commercial.

Which one to use

  • A national lidar model exists for the site: use it. Nothing global comes close.
  • Global, commercial project: Copernicus GLO-30, checked against AW3D30 where the result looks odd.
  • Global, wooded or built-up site, non-commercial: FABDEM gives a better ground surface.
  • Large regional overview: GLO-90 is lighter and enough for maps at 1:100,000 and smaller.

Whatever the source, a free DEM is a design base, not a survey. Vertical errors of several metres are normal for the 30 m global models, more in steep or forested terrain.

How TOPOLUMA chooses

You do not need to download or merge tiles to use this data. TOPOLUMA reads terrain from Mapterhorn, an open project that combines Copernicus GLO-30 worldwide with open national elevation models where they exist, and serves the best one for each place. The data sources page lists the sources and their credits, and every export says which data was used. Draw an area in the studio to get contours, a 3D model or slope diagrams from it; the DEM to DXF guide covers doing the conversion yourself in QGIS.